3_Level_ZZ_Semafor Indicator For MT5
Table Of Contents:
- 3_Level_ZZ_Semafor Indicator For MT5
- Установка 3_Level_ZZ_Semafor Indicator For MT5
- Параметры 3_Level_ZZ_Semafor Indicator For MT5
- Буферы 3_Level_ZZ_Semafor Indicator For MT5
- Основные части кодекса
3_Level_ZZ_Semafor Indicator For MT5 - улучшенная версия индикатора зигзага, который рисует значения 3 зигзагов на графике. 3 зигзага имеют разные периоды для расчета. Поэтому рассчитывается один маленький, один средний и один большой зигзаг. Вместо того, чтобы рисовать зигзагообразные линии на графике (что могло бы загромождать график), этот индикатор рисует точки в зигзагообразных точках. Точки имеют разные размеры, поэтому вы можете различать зигзаги.
Установка 3_Level_ZZ_Semafor Indicator For MT5
После того, как вы загрузили индикатор через форму выше, вам необходимо распаковать zip-файл. Затем вам нужно скопировать файл 3_level_zz_semafor.mq5 в папку MQL5Indicators вашей установки MT5 . После этого перезапустите MT5, и вы сможете увидеть индикатор в списке индикаторов.
Параметры 3_Level_ZZ_Semafor Indicator For MT5
3_Level_ZZ_Semafor Indicator For MT5 имеет параметры 15 для настройки.
input int Period1=5; input int Deviation1=1; input int Backstep1=3; input int HighSymbol1=159; input int LowSymbol1=159; input int Period2=13; input int Deviation2=8; input int Backstep2=5; input int HighSymbol2=108; input int LowSymbol2=108; input int Period3=34; input int Deviation3=21; input int Backstep3=12; input int HighSymbol3=163; input int LowSymbol3=163;
Буферы 3_Level_ZZ_Semafor Indicator For MT5
3_Level_ZZ_Semafor Indicator For MT5 предоставляет буферы 6 .
SetIndexBuffer(0,LowBuffer1,INDICATOR_DATA); SetIndexBuffer(1,HighBuffer1,INDICATOR_DATA); SetIndexBuffer(2,LowBuffer2,INDICATOR_DATA); SetIndexBuffer(3,HighBuffer2,INDICATOR_DATA); SetIndexBuffer(4,LowBuffer3,INDICATOR_DATA); SetIndexBuffer(5,HighBuffer3,INDICATOR_DATA);
Основные части кодекса
int OnCalculate(const int rates_total, // number of bars in history at the current tick const int prev_calculated,// number of bars calculated at previous call const datetime &time[], const double &open[], const double& high[], // price array of maximums of price for the indicator calculation const double& low[], // price array of minimums of price for the indicator calculation const double &close[], const long &tick_volume[], const long &volume[], const int &spread[]) { //---- checking the number of bars to be enough for the calculation if(rates_total lt StartBar) return(0); //---- declarations of local variables int limit,to_copy1,to_copy2,to_copy3; //---- calculation of the first starting index for the bars recalculation loop if(prev_calculated gt rates_total || prev_calculated lt =0) // checking for the first start of calculation of an indicator { limit=rates_total-StartBar; // starting index for calculation of all bars to_copy1=rates_total; to_copy2=rates_total; to_copy3=rates_total; } else { limit=rates_total-prev_calculated; to_copy1=limit+StartBar1; to_copy2=limit+StartBar2; to_copy3=limit+StartBar3; } //---- copy the newly appeared data in the indicator buffers if(CopyBuffer(Handle1,1,0,to_copy1,HighBuffer1) lt =0) return(0); if(CopyBuffer(Handle1,2,0,to_copy1,LowBuffer1) lt =0) return(0); if(CopyBuffer(Handle2,1,0,to_copy2,HighBuffer2) lt =0) return(0); if(CopyBuffer(Handle2,2,0,to_copy2,LowBuffer2) lt =0) return(0); if(CopyBuffer(Handle3,1,0,to_copy3,HighBuffer3) lt =0) return(0); if(CopyBuffer(Handle3,2,0,to_copy3,LowBuffer3) lt =0) return(0); //---- return(rates_total); } //+------------------------------------------------------------------+