HMA Indicator For MT5
HMA Indicator For MT5 için HMA Indicator For MT5 , her zaman gerçek zamanlı hesaplama sorunları olan klasik bir hareketli ortalamaya benzemez. Gövde hareketli ortalamasının yardımıyla, fiyat hareketine çok hassas bir şekilde yanıt veren gövde hareketli ortalama olarak bilinen benzersiz bir HMA bulabilirsiniz. Alım satım aracının fiyatı düştüğünde, hareketli ortalama da güneye doğru gidip düşüş eğiliminin oluştuğunu teyit edecektir. Aksine, fiyat yükseliş momentumu kazanmaya başladığında, hareketli ortalama kuzeyde ticaret yapmaya başlayacaktır. Bu aracı kullanarak kar faktörlerini en üst düzeye çıkarmak için günlük zaman aralığında kullanmalısınız. Fiyat hareketi ticaret stratejisini bilenler, ticaretlerini yapmak için Hull Hareketli Ortalama'daki fiyat hareketi sinyallerini de arayabilirler. Ancak bu göstergeyle piyasada işlem yaparken asla çok sıkı duraklar veya büyük hacimler kullanmadığınızdan emin olun.
HMA Indicator For MT5 Yükleme
Göstergeyi yukarıdaki form aracılığıyla indirdikten sonra zip dosyasını açmanız gerekir. Ardından HMA.mq5 dosyasını MT5 kurulumunuzun MQL5Indicators klasörüne kopyalamanız gerekir. Bundan sonra lütfen MT5'i yeniden başlatın, ardından göstergeyi göstergeler listesinde görebileceksiniz.
HMA Indicator For MT5 Parametreleri
HMA Indicator For MT5 , yapılandırılacak 2 parametrelerine sahiptir.
input uint InpPeriod = 20; // Period
input ENUM_APPLIED_PRICE InpAppliedPrice = PRICE_CLOSE; // Applied price
HMA Indicator For MT5
HMA Indicator For MT5 , 4 arabelleklerini sağlar.
SetIndexBuffer(0,BufferHMA,INDICATOR_DATA);
SetIndexBuffer(1,BufferRAW,INDICATOR_CALCULATIONS);
SetIndexBuffer(2,BufferMAP,INDICATOR_CALCULATIONS);
SetIndexBuffer(3,BufferMAL,INDICATOR_CALCULATIONS);
Kodun Ana Bölümleri
int OnCalculate(const int rates_total,
const int prev_calculated,
const datetime &time[],
const double &open[],
const double &high[],
const double &low[],
const double &close[],
const long &tick_volume[],
const long &volume[],
const int &spread[])
{
//--- @ gt 25@:0 =0 lt 8=8 lt 0;L= gt 5 : gt ;85AB2 gt 10@ gt 2 4;O @0AGQB0
if(rates_total lt period_ma) return 0;
//--- @ gt 25@:0 8 @0AGQB : gt ;8G5AB20 ?@ gt AG8BK205 lt KE 10@ gt 2
int limit=rates_total-prev_calculated;
if(limit gt 1)
{
limit=rates_total-period_ma-1;
ArrayInitialize(BufferHMA,EMPTY_VALUE);
ArrayInitialize(BufferRAW,0);
ArrayInitialize(BufferMAP,0);
ArrayInitialize(BufferMAL,0);
}
//--- gt 43 gt B gt 2:0 40==KE
int copied=0,count=(limit==0 ? 1 : rates_total);
copied=CopyBuffer(handle_maP,0,0,count,BufferMAP);
if(copied!=count) return 0;
copied=CopyBuffer(handle_maL,0,0,count,BufferMAL);
if(copied!=count) return 0;
for(int i=limit; i gt =0 && !IsStopped(); i--)
BufferRAW[i]=2*BufferMAL[i]-BufferMAP[i];
//--- 0AGQB 8=48:0B gt @0
for(int i=limit; i gt =0 && !IsStopped(); i--)
BufferHMA[i]=MAOnArray(BufferRAW,0,period_sqrt,0,MODE_LWMA,i);
//--- return value of prev_calculated for next call
return(rates_total);
}
//+------------------------------------------------------------------+
//| iMAOnArray() https://www.mql5.com/ru/articles/81 |
//+------------------------------------------------------------------+
double MAOnArray(double &array[],int total,int period,int ma_shift,int ma_method,int shift)
{
double buf[],arr[];
if(total==0) total=ArraySize(array);
if(total gt 0 && total lt =period) return(0);
if(shift gt total-period-ma_shift) return(0);
//---
switch(ma_method)
{
case MODE_SMA :
{
total=ArrayCopy(arr,array,0,shift+ma_shift,period);
if(ArrayResize(buf,total) lt 0) return(0);
double sum=0;
int i,pos=total-1;
for(i=1;i lt period;i++,pos--)
sum+=arr[pos];
while(pos gt =0)
{
sum+=arr[pos];
buf[pos]=sum/period;
sum-=arr[pos+period-1];
pos--;
}
return(buf[0]);
}
case MODE_EMA :
{
if(ArrayResize(buf,total) lt 0) return(0);
double pr=2.0/(period+1);
int pos=total-2;
while(pos gt =0)
{
if(pos==total-2) buf[pos+1]=array[pos+1];
buf[pos]=array[pos]*pr+buf[pos+1]*(1-pr);
pos--;
}
return(buf[shift+ma_shift]);
}
case MODE_SMMA :
{
if(ArrayResize(buf,total) lt 0) return(0);
double sum=0;
int i,k,pos;
pos=total-period;
while(pos gt =0)
{
if(pos==total-period)
{
for(i=0,k=pos;i lt period;i++,k++)
{
sum+=array[k];
buf[k]=0;
}
}
else sum=buf[pos+1]*(period-1)+array[pos];
buf[pos]=sum/period;
pos--;
}
return(buf[shift+ma_shift]);
}
case MODE_LWMA :
{
if(ArrayResize(buf,total) lt 0) return(0);
double sum=0.0,lsum=0.0;
double price;
int i,weight=0,pos=total-1;
for(i=1;i lt =period;i++,pos--)
{
price=array[pos];
sum+=price*i;
lsum+=price;
weight+=i;
}
pos++;
i=pos+period;
while(pos gt =0)
{
buf[pos]=sum/weight;
if(pos==0) break;
pos--;
i--;
price=array[pos];
sum=sum-lsum+price*period;
lsum-=array[i];
lsum+=price;
}
return(buf[shift+ma_shift]);
}
default: return(0);
}
return(0);
}
//+------------------------------------------------------------------+